Detailed Product Description

Arc Ferrite segment , Magnet, magnetic stator motor

We have rich experience in supplying Europe moter users, we have TS16949 certified.
We'd pleased to supply full set of PPAP reports with samples to you.

Ferrite (Ceramic) Magnets are essentially composed of oxide materials with Barium
Carbonate or Strontium Carbonate, manufactured under a powder metallurgical process.

The feature of low recoil permeability, along with the high coercive force,
makes them highly resistant to demagnetizing fields. In addition, their relatively
low specific density and economical cost are also very attractive to the magnet
designers. When designing the ferrite magnets for a particular application,
primary consideration should be given to its shape limitation due to the powder
metallurgical manufacturing process and the temperature dependence of ferrite materials.

Ferrite Magnets has good anti-corrosion performance, no surface treatment
needed. There are two manufacturing process for ferrite magnets: Dry Process
& Wet Process. By dry process, can produce isotropic & anisotropic magnets; by
wet process, only anisotropic magnets can be produced. Isotropic ferrite magnets
are not oriented and can be magnetized in any direction; anisotropic ferrite magnets
are different, they are all oriented in the manufacturing direction, and should
be magnetized in the direction of orientation. For dry process, the tool can
be changed and developed easily, while for wet process, it is complicated to
change the tool and the tooling charge is much higher. At present, we have put our
emphasis on arc segment magnets for electric motors, disc magnets and block magnets for special applications .

We specialize in ODM&OEM variours magnet rotors for motors. Magnetic rotors which are made by plastic injection outside NdFeB magnets or ferrites in can, high in efficiency and working with low noise. They are widely applied in cars, water pumps, disk drivers, starting motors of motor bikes and stepping motors, etc.